I hate you so much right now. Also I think it’s 5
It’s only 5. It just overflows.
Depends on the flow from the faucet.
If it is filling 1 faster then water can move between then order will be 1->2->5
If it is slow enough then just 5 fills.
Everything else will be dry. Between 2 to 3 is sealed too. Without lids there is a lot of issues.
I think there’s a potential for 4 to get wet, even though it can’t fill.
If the faucet pressure and flow is so big that it spills out without filling the bucket, the spill could reach 4. Given that the walls of that bucket are extremely cold, the water could freeze over the drain, making that the first bucket to fill up.
So I would say 4.
Because the inlet and outlet of 2 are the same size, 2 will always be filled last, if at all. Once 5 is filled, it will spill out the edges of the container rather than back flowing.
Technically if it’s faster, then at some point 3 will start to get water. Due to 2 overflowing and filling the space between the 2 cups.
6 probably, maybe would, but not 100% sure.
Which means that really 4 can’t fill up over time.
Is the faucet flowing?
deleted by creator
Yeah nothing will fill up until 5 is full. And then since 4 has a leak it, I think basically ONLY 5 will fill.
deleted by creator
The line is blocked between 2-3, so 3,6,&7 don’t get anything.
deleted by creator
Given enough pressure, bucket 1 will never be filled, and it will overflow to 2 and 3. Depending on the flow, 2 could be the first to fill up.
I like the explanatory drawing you provided.
4 before 6 because of the hole in 4.
2 and 3 at the same time.
deleted by creator
even if there’s no floor, they will all fill eventually. it may cause another noah’s ark situation, but what matters is that all the containers will be filled.
And this is why math is a useless major
deleted by creator
3/6/7 can’t be filled, the hole between 2>3 is plugged.
deleted by creator
It was your comment that made me realise
It was your comment that made me realize, agtwr a day later. Damn
None. The water is not running.
All the candidates are thanked for their time and asked to leave except you, who get invited to join MIB.
Looks like they’re all full of air already
😡
5
Also, you suck.
Depends on how fast the liquid is flowing in.
Or, actually, can they even “fill”? These are 2D objects.
Is this that “loss” comic? Why is everyone mad?
Yes
The actual joke aside, 4 has a hole in it, so it won’t.
??? 4 and 5 are not connected
Doh, you’re right, not sure what I was thinking.
Cheers, I got you bro.
5 fills from 2, not 4.
And 3 is blocked
Oh yeah, I got so losst
Unless I completely misunderstand how this works, I think 5 is the only one that will fill up. It then overflows, preventing any of the taller ones from filling. 7 is shallower but won’t start filling until 3 gets fuller than 5, which it never will. This would be true whether the blockage between 2 and 3 is a mistake or not.
You are correct and I agree, but look again.
At the comments.
Then at the image.
Forget all about the water, and the question.
If necessary, reread the title.
Groan.
Please help. I have nightmares of being in a room where everyone else is just waiting patiently for me to remember the thing I forgot/figure out what is happening.
Help
This ‘loss’ thing is so annoying.
Yeah I don’t get it. Why does anyone care if the comic was set up that way and if other people copied it. It’s not funny? It’s not anything?
It’s an in-joke.
The comic used to be big in the ~2000s nerd space, mostly by being one of the earlier video game focused webcomics that hit it big. The author had/has a… polarizing personality and the comic itself went from dick jokes and game references to super serious miscarriage storyline at the drop of a hat.
Que endless satire.
I have never understood the meme but that clues me in a bit, thank you.
Fyi, it’s “Cue endless satire.”
Que is Spanish for “what” and is pronounced similar to Kay.
Queue is a bunch of extra letters standing in line after the “Q”
Cue is “it’s time” - imagine an actor backstage being poked with a pool cue to get them going.
Boo lol
Goddammit.
By far the most annoying meme and it’s not even funny.
Yeah I just got it seeing it for the second time in my feed lol
I think you’re right. Unfortunately, we’ll still have to chalk this up as a loss.
Like losing the game? That was also annoying and the internet stopped doing it eventually.
1 fills up first. the spigot is much winder than the tube so the glass will fill faster than it can drain.
Also rule
who’s to say it isn’t a slow faucet?
If its not properly installed I will call a plumber to fix it.
That’s assuming the valve is open all the way and that there’s a bunch of water pressure behind the spigot. It should be entirely possible to create a very slow trickle by having a massive body of water behind the spigot (making it functionally infinite) but having only a small part of the entrance beneath the surface.
5
Wait… Fuck!
this is right. Even if 2 to 3 is open.
The only other candidate is 1. If the faucet has much higher flow than the pipe from 1 to 2 can drain away, then 1 can fill up faster than it drains.
5 is correct but this is a loss leader.
5, but it also depends on the circumstances. What liquid is used, temperature, viscosity, etc. There’s some material science stuff that’s far beyond the intended scope of this question.
Why 5?
1 fills up halfway, which then overflows in 2. The bottom of 2 has a pipe running out of it, which is directed into 5
I depends on the inflow vs outflow of 1 - it might fill up first. But otherwise, yeah, i would say 5 as well.
I actually started to figure out the sequence…then I realized…fuck you, take my up vote
:3
?
They said :3
All of them are already full of air.
What if this experiment is done in space near a black hole
Is full of Hawking radiation and dreams.
OH İTS THE FUCKİNG LOSS COMİC
:.|:;DAMNIT… YOU WIN!
- 5 which begins to overflow into the room
- 7
- 4 and 6
- 2 and 3
- 1
This is assuming this is a cross section of something 3d and not something 2d otherwise air packets would get trapped and prevent some of this.
5 and 4 are the only ones getting water other than 1 and 2. 3 has a solid line blocking the flow into it, and even if that wasn’t there, since 4 has a hole/drain in the bottom and 5 can overflow, 3 can’t fill enough to reach the outflow. 5 is the only one that can fill up.
Wrong! The room will begin filling with water from the overflow!
Just pick this up and put it into a tub. Now they’re all full. Take that math!
But which first
Go in side ways.
If they bothered to drill a drain into #4, I’m sure there is a floor drain.
I’m viewing the edges of the picture as impermeable.
I’d recognise that pattern anywhere, but I focused in on the problem and almost didn’t notice your dasterdly deed
What pattern? Judging by the comments this is some kind of trick but I don’t know what it is lol
It’s a reference to this
Tap for spoiler
Ctrl+Alt+Delete! Wow there’s a blast from the past!
It’s the “loss” meme
As other replies have said and linked to, it’s meant to be “loss”
Though OP slightly changed the template to fit the puzzle, as the right hand corner is meant to have the shorter piece. That threw me off as well.
The left half is definitely a penis. Not sure what it is poking into on the right though.
… fuck.
Depends on how much you turn on the tap. If you fürn it up completely its 1,else its 5.
Depends on diameter of the pipes leading out too. They look small in the image, but if they’re big enough to handle the max flow out of the faucet, 5 will still fill up first.
i hate you.
edit: read replies before telling me that 7 is walled off
but ignoring my loss, if everything is pressurized i think 7 if unpressurized i think 5
The pipe from 2-3 is walled off though.
well i didn’t see that lol
7 won’t ever fill because the pipe from 2 to 3 is blocked off.
well i didn’t see that lol
Ignoring the walled off stuff, can you ELI5 why pressurized vs not changes things and how so?
my logic was that it’s the shortest way and therefore has the least resistance and therefore the highest flowrate.
while unpressurized gravity would take over
Might be an airlock? It’s hard for me to predict how fluids will really flow
