Ah yes, PCBees

No problem. I think this is a great “final boss” question for learning sed, because it turns out it is deceptively hard!! You have to understand not only a lot about regex, but about sed to get it right. I learned a lot about sed just by tackling this problem!

I really do not want to mess around with your regex

It is very delicate for sure, but one part you can for sure change is at the # Add hyphens part. In the regex you can see (%20|\.). These are a list of “characters” which get converted to hyphens. For example, you could modify it to (%20|\.|\+) and it will convert +s to -s as well!

Still it is not perfect:

• If the link spans multiple lines, the regex won’t match
• If the link contains escaped characters like \\\\\[LINK](#LINK) or [LINK\]\\\\](#LINK)
• If the link is inside a code block ``` it will get changed (which may or may not be intended)

But for a sed-only solution this is about as good as it will get I’m afraid.

Overall I’m very happy with it. Someday I would like to make a video that goes into depth about sed, since it is tricky to learn just from the docs.

I did it!! It also handles the case where an external link and internal link are on the same line :D

sed -E ':l;s/(\[[^]]*\]\()([^)#]*#[^)]*\))/\1\n\2/;Te;H;g;s/\n//;s/\n.*//;x;s/.*\n//;/^https?:/!{:h;s/^([^#]*#[^)]*)(%20|\.)([^)]*\))/\1-\3/;th;s/(#[^)]*\))/\L\1/;};tl;:e;H;z;x;s/\n//;'

Here is my annotated file

# Begin loop
:l;

# Bisect first link in pattern space into pattern space and append to hold space
# Example: `text [label](file#fragment)'
#   Pattern space: `file#fragment)'
#   Hold space: `text [label]('
# Steps:
#   1. Strategically insert \n
#       1a. If this fails, branch out
#   2. Append to hold space (this creates two \n's. It feels weird for the
#      first iteration, but that's ok)
#   3. Copy hold space to pattern space, remove first \n, then trim off
#      everything past the second \n
#   4. Swap pattern/hold, and trim off everything up to and incl the last \n
s/(\[[^]]*\]\()([^)#]*#[^)]*\))/\1\n\2/;
Te;
H;
g; s/\n//; s/\n.*//;
x; s/.*\n//;

# Modify only if it is an internal link
/^https?:/! {
    # Add hyphens
    :h;
    s/^([^#]*#[^)]*)(%20|\.)([^)]*\))/\1-\3/;
    th;
    # Make lowercase
    s/(#[^)]*\))/\L\1/;
};

# "conditional" branch so it checks the next conditional again
tl;

# Exit: join pattern space to hold space, then move to pattern space.
# Since the loop uses H instead of h, have to make sure hold space is empty
:e;
H;
z;
x; s/\n//;

I’ll give another go at it :)

Why you assume there’s only one link in the line?

They did not want external (http) links to be modified as that would break it:

• ✅ [Example](https://example.com/#Some%20Link)
• ❌ [Example](https://example.com/#some-link)

I compromised by thinking that it might be unlikely enough to have an external http link AND internal link within the same line. You could probably still do it, my first thought was [^h][^t][^t][^p] but that would cause issues for #ttp and #A so i just gave up. Instead I think you’d want a different approach, like breaking each link onto their own line, do the same external/internal check before the substitution, and join the lines afterward.

Also, you perform substitutions in the whole URL instead of the fragment component

That requirement i missed. I just assumed the filename would be replaced the same way too Lol. Not too hard to fix tho :)

annotated it is working like this:

# use a loop to iteratively replace the %20 with -, since doing s/%20/-/g would replace too much. we loop until it cant substitute any more

# label for looping
:loop;
# skip the following substitute command if the line contains an http link in markdown format
/\[[^]]*\](http/!
# capture each part of the link, and join it together with -
s/\(\[[^]]*\]\)\(([^)]*\)%20\([^)]*)\)/\1\2-\3/g;
# if the substitution made a change, loop again, otherwise break
t loop;

# convert all insides to the link lowercase if the line doesnt contain an http link
/\[[^]]*\](http/!
# this is outside the loop rather than in the s command above because if the link doesnt contain %20 at all then it won't convert to lowercase
s/\(\[[^]]*\]\)\(([^)]*)\)/\1\L\2/g

This is very close

sed ':loop;/\[[^]]*\](http/! s/\(\[[^]]*\]\)\(([^)]*\)%20\([^)]*)\)/\1\2-\3/g;t loop;/\[[^]]*\](http/! s/\(\[[^]]*\]\)\(([^)]*)\)/\1\L\2/g'

example file

[Some text](#Header%20Linking%20MARKDOWN.md)
(#Should%20stay%20as%20is.md)
Text surrounding [a link](readme.md#Other%20Page). Cool
Multiple [links](#Links.md) in (%20) [a](#An%20A.md) SINGLE [line](#Lines.md)
Do [NOT](https://example.com/URL%20Should%20Be%20Untouched.html) CHANGE%20 [hyperlinks](http://example.com/No%20Touchy.html)

but it doesn’t work if you have a http link and markdown link in the same line, and doesn’t work with [escaped \] square brackets](#and-escaped-\)-parenthesis) in the link

but!! it was fun!

woah, ive never heard of this one. it looks awesome. thanks for sharing!!

Linux, Firefox, virtualization, Blender, KDE Plasma, ffmpeg, Krita, Inkscape, yt-dlp, Godot, programming language toolchains

and I’m a tuna!

a different comment was saying ricing has a sense of being overdone. So with this I was thinking of “overtuning.” I think it fits more as a hobbyist term than a pragmatic one.

o Windows 10
|
o Linux Mint
|
|\__
|   \
|    o Manjaro KDE
|    |
o Fedora KDE
|    |\__
|    |   \
x    |    o Windows 11
     |    o Windows 11 + Arch Linux
     |    |
     o Arch Linux
     |    |
     |    |
     |    o Windows 11 + Debian KDE
     |    |

hopefully it renders well on your client :D